My 1967 Chevy SWB Stepside Project

[Joe67]

This thread will be updated as progress continues so stay tuned

This started out as a '67 Stepside driver we bought in 1991.



We kept it a nice driver until April 2004 when it was hit and caused the damage below.





This is the current state of the project. It was in the 70s today in Michigan so I gave my chassis a bath and layed out some of the body parts

I was fortunate to score some nice sheet metal this past summer. I still need to decide on a powertrain

Chassis is a 1972 1/2 ton 5 lug, front disc, dual exhaust, Big Block mounts, front sway bar setup. Powdercoated gloss black from front to rear.

• Rear fuel tank is from FuelCellGuy - www.aluminumfuelcellcom
• Moog pitman and idler arms with local rebuilt power steering gear
• PST Front end rebuild kit (rubber) - www.p-s-t.com
• PST Trailing arm bushings (Poly)
• Early Classic 4/6 drop kit - www.EarlyClassic.com
• Rear end is a GM 12 Bolt, DTS 3.73, Posi, Moser axles - www.drivetrainspecialists.com
• Stainless Steel Brake lines & hoses - www.InlineTube.com

Next up is the parking brake cables. Once that is done, Everything gets torqued down and the chassis is complete :burn:

Cab is currently awaiting some rust repair on the frame mounts, floors and corners along with some minor mods.

A HUGE thank you to my father, this fourm as well as www.FullsizeChevy.com. Without it I would never have taken this project on