Rear axle flip kit Questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jebb1978 · 11-04-2005, 08:13 PM

Hello again fellows,
I am consittering the DJM flip kit and 3" drop spindles. First question is, since I did the shackle kit the truck is sitting level. With the shackles and flip kit is the rear going to end up lower than the front if I do 3" spindles?

Also I am sure this question has come up in the past but, do I need to C the frame for the flip kit? It looks like it sure would be close to me.

Thanks Guys,
Shawn

11-04-2005, 08:13 PM	#1
Jebb1978 Senior Member Join Date: Aug 2005 Location: Mesa,Az Posts: 3,713	Rear axle flip kit Questions Hello again fellows, I am consittering the DJM flip kit and 3" drop spindles. First question is, since I did the shackle kit the truck is sitting level. With the shackles and flip kit is the rear going to end up lower than the front if I do 3" spindles? Also I am sure this question has come up in the past but, do I need to C the frame for the flip kit? It looks like it sure would be close to me. Thanks Guys, Shawn __________________ 1959 GMC project



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.