Back up and brake light help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

THOR 50 · 11-05-2005, 12:58 AM

Need a little info guys.
My '69 was originally a 3 on the tree. It was converted to an auto 400TH. It appears that the column is correct for a auto truck but I've got no back up lights. Has anyone done this swap and can give me some real world advice?
Do I need to install a fresh back up switch in the column or check the wiring?

Also I recently lost my passenger side brake light only. The bulb works for the turn signal, tail light works with head lights but no brake light on one side. The tail light harness is intact from the plug in the crossmember and I have a brand new correct bulb.

11-05-2005, 12:58 AM	#1
THOR 50 Over worked under paid Join Date: May 2001 Location: Fort Myers, Florida Posts: 378	Back up and brake light help Need a little info guys. My '69 was originally a 3 on the tree. It was converted to an auto 400TH. It appears that the column is correct for a auto truck but I've got no back up lights. Has anyone done this swap and can give me some real world advice? Do I need to install a fresh back up switch in the column or check the wiring? Also I recently lost my passenger side brake light only. The bulb works for the turn signal, tail light works with head lights but no brake light on one side. The tail light harness is intact from the plug in the crossmember and I have a brand new correct bulb. __________________ Roger '69 C-10 with GMC front clip billet grill, 283CI, 400TH and 12bolt posiw/3.73 gears



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.