Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
09-01-2002, 07:17 PM | #1 |
Progress = 0%
Join Date: Nov 2001
Location: Kansas City, MO
Posts: 2,108
|
Air-bagged trucks --> height dimensions
Some of you had asked for some height dimensions of my air-bagged truck. I took some measurements today that might give you a better idea as to how low it actually is. Keep in mind that my tire diameters are 26-3/4 and that the rear is c-notched (with no rubber snubber). Also, I made the measurements in my garage where its flat.... just pulled it out to take the picture.
Dimension A = 10-7/8 . is from the bottom of the very rear of the frame to the ground. Dimension B = 4-5/8 ..is from the bottom of the front of the rocker to the ground. This isnt at the bottom of the rocker lip, but where the curved part meets the lip. Dimension C = 6 .is from the bottom of the front frame horn to the ground. The front could actually go about 1-1/2 lower, but the tire would hit the inner part of the fender. With the fenders installed and the front raised up slightly (as shown in the second pic), the front cross member is about 2 off the ground.
__________________
Jason - '67 GMC swb | '57 Bel-Air 4dr hardtop | '56 210 4dr Wagon | 2000 GMC Sierra |
Bookmarks |
|
|