This is what I've been working on... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jermasaurus · 11-09-2005, 09:00 PM

http://cgi.ebay.com/ebaymotors/1999-...ayphotohosting

The truck was reposessed and brought to where I work. All I really did on it was install new compressors, 2 more tanks, and some re-wiring. I mounted the solenoids in the grey box and re-routed some air lines. It's not bad for the price considering it only has 9,000 miles on it, but the rear end is not positioned right and needs at least another bracket with bushings.
And the alternator can't keep up with the four compressors, so they can kill the battery and the motor at idle. But it's fun to hit switches. I don't know why they didnt take a picture of it laid out because it lays rockers. The frame is Z'd front and rear.
-Jeremy

11-09-2005, 09:00 PM	#1
jermasaurus Registered User Join Date: Dec 2004 Location: New Lenox, IL Posts: 442	This is what I've been working on... http://cgi.ebay.com/ebaymotors/1999-...ayphotohosting The truck was reposessed and brought to where I work. All I really did on it was install new compressors, 2 more tanks, and some re-wiring. I mounted the solenoids in the grey box and re-routed some air lines. It's not bad for the price considering it only has 9,000 miles on it, but the rear end is not positioned right and needs at least another bracket with bushings. And the alternator can't keep up with the four compressors, so they can kill the battery and the motor at idle. But it's fun to hit switches. I don't know why they didnt take a picture of it laid out because it lays rockers. The frame is Z'd front and rear. -Jeremy Last edited by jermasaurus; 11-09-2005 at 09:03 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.