Building kickpanel speakers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jakeslim · 11-14-2005, 09:11 AM

Ok, I followed the instruction on here to build a set of kickpanel speaker sets. I am using fiberglass resin, panel board, etc. I gotta tell you, this is WAY COOL!
I've never done something like this but am finding it really easy. I bought a $4.99 glue gun at HF and it made life sooo easy. I used an old t-shirt to set the intitial form, then layed my first coat of resin on the drivers side enclosure.
It will look excellent and I highly recommend this project to all.

But where are the pics?

Coming , I promise

11-14-2005, 09:11 AM	#1
jakeslim Premium Level Member Join Date: Aug 2004 Location: Northern CA Posts: 829	Building kickpanel speakers Ok, I followed the instruction on here to build a set of kickpanel speaker sets. I am using fiberglass resin, panel board, etc. I gotta tell you, this is WAY COOL! I've never done something like this but am finding it really easy. I bought a $4.99 glue gun at HF and it made life sooo easy. I used an old t-shirt to set the intitial form, then layed my first coat of resin on the drivers side enclosure. It will look excellent and I highly recommend this project to all. But where are the pics? Coming , I promise __________________ 69 K5 CST stock- 350, 4speed 77 K5 - 383, auto, 6" lift, D60 front, 14b rear, 39" tsl's, Last edited by jakeslim; 11-14-2005 at 09:13 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.