![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Premium Level Member
Join Date: Aug 2004
Location: Northern CA
Posts: 829
|
Kickpanel Speaker Project*PICS*-updating all week till done!
Ok, as I noted in an earlier post, I started making my new speaker kickpanels as
mentioned on other post here in past. I bought one panel board at hardware store for about $5.00. Also bought a gallon of fiberglass resin for about $30, but you could get buy with a much smaller amount ![]() 1) Pic shows the panel cut, with raised "o" for speak, angled with various post length. ![]() Old T-shirt does the job..ruined with work on truck ![]() ![]() 2) In first pic, the "O" is already glued to t-shirt. Now to glue the shirt to frame of kickpanel. Buy a cheap $4.99 glue gun at HF..easy and cheap. ![]() Starting the glueing process. Work around, making sure it is smooth and tight( ![]() ![]() ![]() All done with Glue! Notice that I brought done the section that will have the vent lever secured to it so that there is no interference. You can see the glue line that makes this happen. ![]() Each day this week, I'll be adding to post as I progress. Goal is to finish for a Saturday installation!
__________________
69 K5 CST stock- 350, 4speed ![]() 77 K5 - 383, auto, 6" lift, D60 front, 14b rear, 39" tsl's, |
![]() |
![]() |
Bookmarks |
|
|