![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Nov 2004
Location: New Lenox,IL
Posts: 306
|
First thread in a while
I know it has been a while since I have been on here and some of you probably forgot about my little stock 69'. YES it is stock I know that some of you guys like that lowered look with tires that I would put on a wagon!!. But I think stock or raised with big mudin' tires either way is good for me. Anyway here's what I have been up to lately, I pulled out the whole interior including dash, Cleaned the gas tank put that back in, pulled the entire vent system out gonna get new ones, oh that remindes me does anyone have a diagram or something to tell me how to put all these new vents back together in the dash?, And I found quite a bit of surface rust on the driver side and a corroded seam that is completely gone the opening that I am worried about is closest to the cab wall on the floor the seam sealent has been history for about 10 years, and the hole is about maybe 2-3 inches open then gets smaller as it goes down the floor seam any Ideas of how to patch it, I got some old school ideas but I want do this right so any other Ideas would be greatly appriciated. And that is about it the motor is running great a little lazy though I think I'll change the cam timng a little because I set a couple degrees advanced, maybe change the heads, and just do what these trucks do best work and drive.
__________________
1985 Chevrolet C-30 454 1-TON Dooley 1969 CHEVROLET CST-10 PICK-UP Good memories 1999 Chevrolet Z71 Ext. cab 5.7L Good Memories With a quart of oil, and a gallon of gas, she won't let no other car pass!!!. ![]() ![]() |
![]() |
![]() |
Bookmarks |
|
|