|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
12-04-2005, 08:45 PM
|
#1 |
|
Registered User
Join Date: Sep 2003
Location: Rayne, LA
Posts: 2,781
|
? about 67-72 "Bolt-In" C-Notch
Those of you who have done this Classic Performance Products Bolt-In C-Notch, did you have "issues" with the 2 bolts on the outside rear portion of the driver's side notch? On my setup the lower more forward of the two is directly in line with the 2 bolts that come in from the bottom. The other bolt hole is directly in line with the crossmember that is just behind the rear end, and the bolt won't go all the way in. I'm thinking that I will just drill some more holes that aren't in line with anything, but I figured I would ask to see what others have done for this situation, if you even had the same problems.
Thanks in Advance,
__________________
Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build |
|
|
| Bookmarks |
|
|
Threaded Mode