Disc Brake Question??????? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

justin · 09-08-2002, 06:59 AM

Last night I tried to bleed my all new brake system. The master cylinder,lines,pads,shoes,calipers are all new. Here is the question, Do you have to bleed the master cylinder somehow? I put brake fluid in and pumped the brakes about 1000 times but the fluid never went into the lines. I tried opening up a couple bleeder valves but the fluid would still not come thru the line?? Does the truck have to be running to get vaccuum to the booster??
Thanks for any help you may be able to give.
Justin

09-08-2002, 06:59 AM	#1
justin PROJECT LO-LYF Join Date: Jul 2002 Location: MO. Posts: 285	Disc Brake Question??????? Last night I tried to bleed my all new brake system. The master cylinder,lines,pads,shoes,calipers are all new. Here is the question, Do you have to bleed the master cylinder somehow? I put brake fluid in and pumped the brakes about 1000 times but the fluid never went into the lines. I tried opening up a couple bleeder valves but the fluid would still not come thru the line?? Does the truck have to be running to get vaccuum to the booster?? Thanks for any help you may be able to give. Justin __________________ FOUNDING MEMBER OF THE "O-SH*T, THAT TRUCK IS LOW" CLUB PROJECT: LO-LYF Bagged 68 Shorty home.att.net/~justin.lewis



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.