Tunnel Ram setup, Holley 750DP, FP gauge

[ed455]

Selling some parts I wanted to finance parts I NEED.

Tunnel Ram, carbs and spacers - $425
Tunnel Ram and carbs w/o spaces - $375

Tunnel ram is a weiand that was polished but I wasn't to happy with the polish job so I bead blasted it and powdercoated it silver vein. It also has the runners drilled for future nitrous use.

Carbs are fresh but will need to be tuned. Have a pair of vacuum secondary equalizing dashpot tops. This will be included. This will make sure that the vacuum secondaries open at the same rate on both carbs. The 2" spacers are 4 hole phenolic spacers that will give a good strong signal to the carbs and should improve streetability, but I bought them mainly to try and get this setup tall enough to stick up though the hood of my '66.

Holley 750 Double pumper (List #4779) will need a kit and cleaning. $150

Fuel pressure gauge. Autometer machanical gauge in very good condition. Has the chrome mounting cup and mount. The mounting ring for the cup has VERY small pits that would require VERY close scrutiny to see. I think I could make them practically invisible with some steel wool. Also has a -4 an 90* fitting. $35

The other items will be in the 60-66 parts board. I intend to ebay all of this stuff monday unless someone on here wants it.

I WILL NOT SELL THE TUNNEL RAM AND CARBS SEPARATE.

SHIPPING NOT INCLUDED.

Ed