700R4 installed!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sam's 72 · 09-12-2002, 09:55 PM

Well, I got the 700r4 in, and driving. I do not have a tach so I don't know how much RPM change I got out of doing this. So far so good, done took it on a 50 mile trip every thing seems good. The only thing I didn't have time to do, was go with a one piece drive shaft. I will do this next. Had my tranny guy set up the TV cable with gauges, and installed a 28000 gross vw, tranny cooler. The biggest thing I like so far is the lock up on it, it is set up to lock up hydrolicley. No wire involved to hook up to brake.
Sam

09-12-2002, 09:55 PM	#1
sam's 72 Senior Member Join Date: Nov 2001 Location: Pasadena, Texas, USA Posts: 1,005	700R4 installed!! Well, I got the 700r4 in, and driving. I do not have a tach so I don't know how much RPM change I got out of doing this. So far so good, done took it on a 50 mile trip every thing seems good. The only thing I didn't have time to do, was go with a one piece drive shaft. I will do this next. Had my tranny guy set up the TV cable with gauges, and installed a 28000 gross vw, tranny cooler. The biggest thing I like so far is the lock up on it, it is set up to lock up hydrolicley. No wire involved to hook up to brake. Sam __________________ 72 LWB chevy truck. Pasadena, Texas



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.