![]() |
![]() |
#1 |
Car Knocker
Join Date: May 2001
Location: jefferson,arkansas
Posts: 664
|
Blower motor quit
My heater blower motor just quit. Thought I blew a fuse. Checked it out everything ok. Unplugged the wire going to the blower and showing 14.7 volts with engine running and blower switch on high. Thought the motor finally burnt up. Just to be sure I hooked a temp wire from + side of battery to motor and the thing works. Now if I hook up the real wire to the fan and put a multimeter on it the reading is 0, if I unhook the wire and test again 14.7. I'm lost, any ideas.
__________________
68 c-10,91 sportside bed,350 .030 over,4 bolt,10-1 comp,2.05 intake/1.94 exhaust,1.6 Harland Sharp roller rockers,edelbrock rpm cam and intake w/750 carb, 700r4, 3.73 gears,Jacabbs Electronic Igntion w/Accel HEI distributer and super coil. ZR-1 roll pan, filled tailights. Blazer tank. Hidden hitch. 2 1/2" Flowmaster 40's. Parts bought but not installed>> ford 9" posi with disc. CCP front and rear lowering kit 4/5. Cab corners,foor boards,rockers, cab braces, Phatom grill, Painless wiring kit. |
![]() |
![]() |
Bookmarks |
|
|