Very Important info for you Guys wishing to run 73 and up Spindles

[72MARIO]

Here I go this took myself and Bill the owner of Bills truck shop in Ontario Canada to figure out Thought I would pass it on to you guys !Here is the list of stuff you need to Know .


1. The center link from 67-70 is diffirent from 71-72 the holes are bigger in 71-71 than in 67-70 YOU need to use a 67-70 center link or the one with the smaller holes .

2. Use 73 -up outer tie rod .

3. Classic Performance Products sell the sleve you must use it has 11/16LH thread on one side and 5/8 RH thread on the other. part number CP4SC $49.00 Bill can also get you the stuff just give him a call.

4. you must use a 67-70 outer tie rod on the inside seriously !

5. If you are thinking well the inner tie rod should be long /The sleeve in a quite a bit longer than the original.

6 you also use 73 up ball joints(not sure if you have too)

Bill can get you the part 's also he is a guy a runs a awesome shop. his number is 905 725 3460