Piston recomendations - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jmanz69 · 09-15-2002, 12:10 PM

I am finally going to get my commision from a porject I did at Ford in Sharonville OH, so I can get my 327 machined and ready to rebuild. It needs bored 0.030 and so I need new pistons. I am thinking of Keith Black Silv-O-Lite Hypereutectic. Either with a flat top or .100 dome. Any opinions? They are reasonably priced and that is good. Only $20 diff on the flat top or domes, so it's a toss up. I like the higher comp with the domes. I am using Vortec heads when I put it back together, and thinking of getting the 327/350HP cam with .447 lift.

Thanks

Jmanz69

09-15-2002, 12:10 PM	#1
jmanz69 Careful, they attack... Join Date: Aug 2001 Location: Waterford, MI, USA Posts: 1,107	Piston recomendations I am finally going to get my commision from a porject I did at Ford in Sharonville OH, so I can get my 327 machined and ready to rebuild. It needs bored 0.030 and so I need new pistons. I am thinking of Keith Black Silv-O-Lite Hypereutectic. Either with a flat top or .100 dome. Any opinions? They are reasonably priced and that is good. Only $20 diff on the flat top or domes, so it's a toss up. I like the higher comp with the domes. I am using Vortec heads when I put it back together, and thinking of getting the 327/350HP cam with .447 lift. Thanks Jmanz69



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.