|
01-22-2006, 12:13 PM
|
#25 |
|
I am a Referee of life.
Join Date: Jun 2000
Location: Greensboro N.C.
Posts: 13,992
|
Re: 400 Hp
I would say the cheapest way to (reliable)400 HP is to determine which parts you have will be useable(i,e, Block,heads crank ect).Find out exactly what you have then call Summit,Edelbrock and whoever else and get their input.There are a lot of knowledgeable folks on this BB but their opinions differ (Thank GOD or it would be boring in here).The manufacturers should be able to help you pick a COMBINATION which is going to be the key to making the kind of power you want.The engine companies are going to want to know tranny,rear gear ratio,intended use,and what parts you have that you must use.
BTW,since parts are cheaper you could probably make the same HP for less with a smallblock.
__________________
The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil" Last edited by PanelDeland; 01-22-2006 at 12:14 PM. |
|
|
| Bookmarks |
|
|
Threaded Mode