HEI hitting firewall???

[rodnok1]

Originally Posted by Mechdawg

Ok I went out there and measured my front body mount pucks measure right at 1 inch thick. Is this correct? Or did I end up with the wrong set. Can anyone out there give me the correct thickness for the front and rear pucks?
Once again its a 67 2wd short wheel base. Thanks again guys.

You will never get those tall valve covers off with that little clearance. I couldn't get mine on, ended up notching the firewall, you can see it at bottom left of picture. Both sides are notched now. With stock v/c's they clear fine.