Dana 44 drums obsolete? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Geezer · 03-27-2006, 08:21 PM

I had Napa order new drums for the rear of my 67 GMC (6 lug Dana 44 posi) When they came in they were too shallow by about ½ inch. They tried to look up some that would work but had no luck. They said mine were obsolete and no longer made. After shelling out a chunk of change to have the rear rebuilt I really need to find some drums that will work. Anybody else had this problem and found drums or a solution besides switching to disc?

Oh yea, the drums are 11" with 2-1/2" of pad surface area, 3-1/2 total depth.

03-27-2006, 08:21 PM	#1
Geezer Registered User Join Date: May 2005 Location: Spring Branch Texas Posts: 177	Dana 44 drums obsolete? I had Napa order new drums for the rear of my 67 GMC (6 lug Dana 44 posi) When they came in they were too shallow by about ½ inch. They tried to look up some that would work but had no luck. They said mine were obsolete and no longer made. After shelling out a chunk of change to have the rear rebuilt I really need to find some drums that will work. Anybody else had this problem and found drums or a solution besides switching to disc? Oh yea, the drums are 11" with 2-1/2" of pad surface area, 3-1/2 total depth. __________________ If you can't drive it park it! If you can't park it milk it! Last edited by Geezer; 03-27-2006 at 08:38 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.