Parting out 87 Chevy (K-20) 3/4 ton Pickup - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dpmalibu · 04-01-2006, 11:12 AM

Only body parts are the hood and front fenders. The driver side has rot on inside of fender.Not sure about the pass. fender yet. Hood is straight. Dana 44 front rear and 14 bolt FF in rear(SOLD). Both have 4.10's. Trans is t-400 and has been rebuilt. Has 25,000 miles and new converter. Motor has been sold. NP208 Transfer case. Also have both shafts. No bed.Prices are the following:

2) T-400 trans $400

3) Np208 $125

4) hood $40

8) driveshafts $20 front/ rear $40

Don't have any other parts except for what I listed; This was a running and driving truck before the guy I bought it from started taking it apart. if interested in anything give me a call (609) 481-8811

04-01-2006, 11:12 AM	#1
dpmalibu Registered User Join Date: Dec 2004 Location: Hatboro,PA Posts: 367	Parting out 87 Chevy (K-20) 3/4 ton Pickup Only body parts are the hood and front fenders. The driver side has rot on inside of fender.Not sure about the pass. fender yet. Hood is straight. Dana 44 front rear and 14 bolt FF in rear(SOLD). Both have 4.10's. Trans is t-400 and has been rebuilt. Has 25,000 miles and new converter. Motor has been sold. NP208 Transfer case. Also have both shafts. No bed.Prices are the following: 2) T-400 trans $400 3) Np208 $125 4) hood $40 8) driveshafts $20 front/ rear $40 Don't have any other parts except for what I listed; This was a running and driving truck before the guy I bought it from started taking it apart. if interested in anything give me a call (609) 481-8811 Last edited by dpmalibu; 04-03-2006 at 09:13 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.