Proper way to tap into a wire - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Nima** · 04-02-2006, 01:36 PM

I was working on my front disk swap which I had to have oral surgery due to broken tooth!. Now, I am off of any mild to heavy work for 2 weeks per my oral surgen!. God D.. it hurts!! (pocket and gums!!). Any way, since I can not sit still I thought do some electrical work.This might be very simple for most of you but I have not done this before. I need to tap into some wires without cutting them. Is it just like removing the cover from the original wire then twist the new one along it (solder it preferably) or is there any kind of connection or tool for it?

04-02-2006, 01:36 PM	#1
Nima Blue 67 Join Date: Apr 2004 Location: Western WA Posts: 1,178	Proper way to tap into a wire I was working on my front disk swap which I had to have oral surgery due to broken tooth!. Now, I am off of any mild to heavy work for 2 weeks per my oral surgen!. God D.. it hurts!! (pocket and gums!!). Any way, since I can not sit still I thought do some electrical work.This might be very simple for most of you but I have not done this before. I need to tap into some wires without cutting them. Is it just like removing the cover from the original wire then twist the new one along it (solder it preferably) or is there any kind of connection or tool for it? __________________ 1953 GMC 3/4 ton: current project 1967 C20: 5.3 voretc with T5 conversion, 4 wheel 8 lug disc brake 1972 Nova: my 4 door sport sedan! 5.3 voretc + T5 conversion. drivable project, FUN!! 1979 Camaro Z28: 5.3 vortec conversion with build TH350: drivable project, Fun to drive 1992 Camaro RS convertible (Z28 clone): 5.3 conversion with build T5: on going project 2005 Silverado 2500, 4x4 Duramax, original owner



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.