2 different Inner Rocker panels

[Solver]

Wasn't sure if this was common knowledge so I thought I would post this.
Ordered new inner rockers to put on my truck and got something different this time. I usually recieve the flat plate that goes in back of the rocker panel(bottom pic) but this time I got a inner panel with the wire channel built in (top pic). Now if you are replacing floors the top one with the channel won't work well as it is hard to match up with new floor channel shape. If I was just replacing rockers and inners this would be great as alot of times if the rocker is bad so is the groove that the wiring sets in. With this top panel it may save having to buy a flor panel like I usually do just to be able to cut off the outside edge to have that channel. Also need to be careful when ordering as these are both called inner rocker panels.Sorry if this is old news to you but it was new to me as I had ordered 4 inners and had to reorder 4 flat inners from someone else.