Front spindle steering stops - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rokcrln · 04-14-2006, 12:12 AM

I am putting a set of drop sront spindles on a 71 2wd blazer for a customer and ran into a new one. It apears that I may need to cut off the bottom steering stop on the lower arm. It looks like it hits way to soon and you would end up with a not very good turn radius. Has any one ran into this before. I have installed alot of set before and this is th efirst of this problem I have run into.

Kevin
LFD Inc.

04-14-2006, 12:12 AM	#1
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Front spindle steering stops I am putting a set of drop sront spindles on a 71 2wd blazer for a customer and ran into a new one. It apears that I may need to cut off the bottom steering stop on the lower arm. It looks like it hits way to soon and you would end up with a not very good turn radius. Has any one ran into this before. I have installed alot of set before and this is th efirst of this problem I have run into. Kevin LFD Inc. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.