Ignition Bezel, Ignition Switch,Electrical, 700r4, and Fuse box-I GOT PROBLEMS!!!!!

[5150]

This is going to be long so bear with me.

I've been putting in my 700r4 and finally yesterday one of the guys from the tranny shop came over to help me with the TV system. So it's all ready to put fluid in and start up.

As some of you know my ignition switch mysteriously locked up on me and I had to drill it out. Since I destroyed everything but the dash getting it out I had to get all 3 new parts-Ignition switch, Ignition bezel, and the key cylinder. Hadn't really fixed it yet because of the tranny-It wasn't exactly going anywhere. Well, I ASSUME you have to find a way to get the bezel to STICK to the dash. At least that's the way the old one was on there. So I glued it on on Friday and today went out and screwed on the ignition switch and put in the key cylinder. Well, with a little pressure from the black igniton plug the bastard came right off the dash. I didn't care just get the damn thing started to test the 700r4.

Well, it was running for a little while and died. Tried to start it back up and it would just turn over. I think it was gas. So I put about a half a gallon that I had lying around in. Noticed one of the red wires on the ignition plug was coming out and shoved it back in. Somehow this damn thing won't turn over at all now. I have NO power to my fuse box or nothing. NO headlights, NO tail lights. Hell, the only thing I got is my Cheap LED light flashing.

Is there some type of relay or something that I don't know about that I blew?