this is good frame paint - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jiggs · 10-03-2002, 03:52 AM

I have seen this stuff used for semi frames where corrosion from acids is an everyday concern. It is call Endura, and is made in Edmonton,Alberta,Canada. The stuff that was used was the EX-2C topcoat. It's about $100 CAD for a gallon that comes with a reducer that when mixed gives you 2 gallons. Go to www.Endura.ca and check it out. They have epoxy primers as well. After it was fully cured a good blow with a 2 pound sledge didn't even chip it. It stays glossy as well.

This could be another one of those things that I thought was great, but everyone else has known about forever.

For the Canadians on the board, Acklands/Grainger has the stuff, or can get it.

10-03-2002, 03:52 AM	#1
jiggs poker face Join Date: Jul 2002 Location: Saskatoon, Saskatchewan Posts: 218	this is good frame paint I have seen this stuff used for semi frames where corrosion from acids is an everyday concern. It is call Endura, and is made in Edmonton,Alberta,Canada. The stuff that was used was the EX-2C topcoat. It's about $100 CAD for a gallon that comes with a reducer that when mixed gives you 2 gallons. Go to www.Endura.ca and check it out. They have epoxy primers as well. After it was fully cured a good blow with a 2 pound sledge didn't even chip it. It stays glossy as well. This could be another one of those things that I thought was great, but everyone else has known about forever. For the Canadians on the board, Acklands/Grainger has the stuff, or can get it. __________________ If you could kick the person in the *ss responsible for most of your trouble, you wouldn't sit for a month.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.