406 " sbc FOR SALE

[1987 Shortwide]

I'm needing to get rid of the motor in my truck.

I bought it from my brother about 2 years ago, and he had put about 2000-2500 miles on it is all.

-400 block bored .030 (all work done when it was rebuild, freeze plugs, cam bearings, etc. etc. etc.)
-400 78cc Iron heads, larger exhaust valves, complete valve job (the heads have had a good amount of work done to them for a power adder application...
-Crane cam (nitrous cam, can get more specs later)
-GM cast crank checked over and polished during rebuild
-reconditioned GM rods (again, when rebuild was done)
-TRW forged pistons (8.2:1 compression with 78cc heads)
-Holley Contender intake (zero miles on fresh ceramic coating)
-billet chain cover (Cloyes True Roller)
-aluminum roller tip rockers
-Holley 600 cfm carb with vaccum secondaries and annular discharge squirters

This motor is estimated at about 400-430 hp a the flywheel N/A, and the compression will allow for a bit of nitrous or some boost like I was planning on running.
Will sell carb to pan with chrome valve covers for $3,000.

Can get pics up also if interested.

stevenfriesen@cox.net