65-70 5x5 Lug Disc Stock Height - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**dennislbrooks** · 05-03-2006, 06:57 PM

These are ready to go on the stock front end of a 65-70 C10. You will need 1972 flex brake lines, proportioning valve, banjo bolts, 72 MC, Moog K6117 lower ball joints, K6136 upper ball joints. Outer tie rod ends shown are new and threaded for the 65-70 steering link. Slight grinding of the spindel stops will restore turning radius. $220 local pick up only unless it is on my way to somewhere. or trade - would like a nice SM420. PM me if you have interest.

05-03-2006, 06:57 PM	#1
dennislbrooks Senior Member Join Date: Feb 2004 Location: Williamsburg, Ohio Posts: 1,787	65-70 5x5 Lug Disc Stock Height These are ready to go on the stock front end of a 65-70 C10. You will need 1972 flex brake lines, proportioning valve, banjo bolts, 72 MC, Moog K6117 lower ball joints, K6136 upper ball joints. Outer tie rod ends shown are new and threaded for the 65-70 steering link. Slight grinding of the spindel stops will restore turning radius. $220 local pick up only unless it is on my way to somewhere. or trade - would like a nice SM420. PM me if you have interest. Attached Images Last edited by dennislbrooks; 05-03-2006 at 07:38 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.