"If you build it right it does not need balancing" - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevybill · 05-22-2006, 06:13 PM

I called a machine shop today about a driveshaft for my c-10. I am using a vortec 350 along with a late model 5 speed. His quote"if you build it right it does not need balancing" his only condition was for street use not on the dragstrip. This is a shop specializing in driveshafts, he told me they have built all types for all types of applications. This shop is in Tupelo about an hour drive from my home. My only other choices is Memphis or Jackson which is 2.5 hours from both.

Lets hear from the board members.
Thank you for your input.

05-22-2006, 06:13 PM	#1
chevybill Senior Member Join Date: Oct 2004 Location: calhoun city ms Posts: 940	"If you build it right it does not need balancing" I called a machine shop today about a driveshaft for my c-10. I am using a vortec 350 along with a late model 5 speed. His quote"if you build it right it does not need balancing" his only condition was for street use not on the dragstrip. This is a shop specializing in driveshafts, he told me they have built all types for all types of applications. This shop is in Tupelo about an hour drive from my home. My only other choices is Memphis or Jackson which is 2.5 hours from both. Lets hear from the board members. Thank you for your input. __________________ ongoing 1970 c 10 lwb 1994 z-28 few mods.-owned since new 1978 vette silver/grey 25th anniv. paint



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.