Finally...more quality time spent with the Blazer...

[FuelCellGuy]

Well, now that we are somewhat organized in our new shop addition, I finally got to work on the Blazer. The progress for the last day and a half goes as follows:
1. Cut all rust out of the firewall, welded new patch panels in (including the factory a/c holes), primed and painted the entire firewall.
2. Dropped the engine in for the motor mount mockup.
3. Made a new frame mounted bracket for the Panhard bar.
4. Removed all the glass from the top, cleaned the glass, tinted the glass, and re-installed it.

Hopfully tomorrow, it will be next door at the frame shop getting a little tweaking in the rear.

I still need to strip and paint the spindles and brake hardware and install the new p/s gearbox and tie rods. Later, Mark