Auto tranny conversion - The 1947 - Present Chevrolet & GMC Truck Message Board Network

boot85 · 06-01-2006, 08:51 PM

I have a 71 C10 2WD with a 4spd and am in the process of converting it over to a TH350 for a 72 C20. I am wondering if the drive shaft will work from the 4spd or will I need to get the one off the donor truck? Just need some good info on it, if the lenght is the same and the splines are the same. I am wondering because the salvage yard wants $125 for it and think that I can save some money by using something that I already have.

Thanks

I just figured out how to post that is why I posted in the welcome section.
Sorry

06-01-2006, 08:51 PM	#1
boot85 71 Chevy Join Date: May 2006 Location: Madison, Wisconsin Posts: 83	Auto tranny conversion I have a 71 C10 2WD with a 4spd and am in the process of converting it over to a TH350 for a 72 C20. I am wondering if the drive shaft will work from the 4spd or will I need to get the one off the donor truck? Just need some good info on it, if the lenght is the same and the splines are the same. I am wondering because the salvage yard wants $125 for it and think that I can save some money by using something that I already have. Thanks I just figured out how to post that is why I posted in the welcome section. Sorry



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.