ECE 2.5 drop front spindles w/pics - The 1947 - Present Chevrolet & GMC Truck Message Board Network

robsm88 · 06-02-2006, 05:01 PM

I went with Early classic for the front drop spindles. I just got the left side done. Now, of course the snowball started. I couldn't handle putting the old rust rotors on, so I decided I needed vented front rotors and then I decided to get new calipers too. Napa will have them in today, so I did it. Vented rotors ran $150 for the pair and the rebuilt calipers were only $36 for the pair.
I don't know if I will ever finish if I keep upgrading everything I work on.

I included a before pic just for fun.

Next unnescessary upgrade - steel braided lines?

06-02-2006, 05:01 PM	#1
robsm88 Registered User Join Date: Apr 2006 Location: az Posts: 114	ECE 2.5 drop front spindles w/pics I went with Early classic for the front drop spindles. I just got the left side done. Now, of course the snowball started. I couldn't handle putting the old rust rotors on, so I decided I needed vented front rotors and then I decided to get new calipers too. Napa will have them in today, so I did it. Vented rotors ran $150 for the pair and the rebuilt calipers were only $36 for the pair. I don't know if I will ever finish if I keep upgrading everything I work on. I included a before pic just for fun. Next unnescessary upgrade - steel braided lines? Attached Images Last edited by robsm88; 06-02-2006 at 05:09 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.