About to do Serpentine swap. Have a few questions

[CN84C10]

Ok, I have the complete setup from a 1993 C1500 with a 5.7L. The only problem is, the only parts that are any good are the brackets because the donor vehicle was submerged by hurricane Katrina. Here is a list of the NEw parts I bought

New Tensioner and idler
Compressor (For 93)
Alternator (For 93)
Water Pump (for 93) I'll deal with the wiring after I get it all put on

Now here are my questions

I have the A/C lines from the 93 will those work?

Which dryer do I use? the one for My 84 or the one for a 93?

Will my fan work with the reverse rotation water pump?

Do I need to get a P/S pump too or will the one from my 84 work?

The block/Heads is from a 97 pickup so there shouldn't be any bolting issues, I think.

Also, if anyone wants to give some pointers they would be greatly appreciated.

Thanks
Chris