I6 to V8 Swap - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GruntyPants · 06-12-2006, 02:51 PM

Ok, I swear that I've searched the board and I can't find anything on putting a 350 with TH350 into my '67 C-10.
I finally got the truck in serviceable condition, but the I6 just smokes 'impressively' as my friend puts it. I have access to a supposedly 'smoke free' 350 with TH350 attached, and just need to know what motor mounts to look for, what trans mounts I'll need and if the drive-shaft will need to be altered.
Currently the truck has a 250 with a 3 speed, which after my test drive yesterday seems like either it is not synchronized in first, or the synchros are just bad.

Anyway any help and links to some documentation would be appreciated, I'm going to try to get this done in the next couple of weeks.

Thanks!

06-12-2006, 02:51 PM	#1
GruntyPants Registered User Join Date: Jan 2006 Location: Kennesaw GA Posts: 95	I6 to V8 Swap Ok, I swear that I've searched the board and I can't find anything on putting a 350 with TH350 into my '67 C-10. I finally got the truck in serviceable condition, but the I6 just smokes 'impressively' as my friend puts it. I have access to a supposedly 'smoke free' 350 with TH350 attached, and just need to know what motor mounts to look for, what trans mounts I'll need and if the drive-shaft will need to be altered. Currently the truck has a 250 with a 3 speed, which after my test drive yesterday seems like either it is not synchronized in first, or the synchros are just bad. Anyway any help and links to some documentation would be appreciated, I'm going to try to get this done in the next couple of weeks. Thanks! __________________ -- Shawn '67 Short Step '70 Short Wide



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.