Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
07-01-2006, 12:37 AM | #1 |
All Praise RANDY!!
Join Date: Sep 2004
Location: Central California
Posts: 391
|
Please HELP!!! Need pics ASAP
Well, we just rebuilt the front end of the 72 suburban, we did one side at a time and put things back just as they were...since we did one side at a time. Well I take it to get aligned and the guys say that the upper control arms are on the wrong sides??? So I go ahead and have them switch them, figuring they know more than me... and this place is highly recomended by a few people I know...but when I turn the wheel sharply to the right or left, the wheel tilts out real bad at the top and the wheel looks like it is only riding on the outer edges of the wheel? I have had this thing aligned twice already and the previous place told me the track bar was on wrong, so we switched it out and put it so that it is VERY close to the crossmember???
Basically I would like to see some pics of how close the track bar should be on 2wd's to the cross member, and should the dowel to line up the the upper control arm shaft be toward the front or the rear of the vehicle??? I think having these two questions answered would greatly help me finish what was supposed to be a simple rebuild and has now turned into a real cluster-F!!!! Thanks in advance! Happy Fourth to US ALL!!! |
Bookmarks |
|
|