K20 Front Axles - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*FormerMember* · 07-16-2006, 08:12 PM

1974 Chevy K20 Dana 44 with 4.10s and flat top knuckles (8 lug). All new ball joints, bearings and calipers. You'll need to turn the new rotors and lube it up as this axle's been sitting for 3 years since it's rebuild. 200.00

1973 Chevy K20 Dana 44 with 3.73's and flat top knuckles (8 lug). All new ball joints, bearings and calipers. You'll need to turn the new rotors and lube it up as this axle's been sitting for 3 years since it's rebuild. 200.00

These should fit earlier trucks as well. Good way to get disk brakes and open knuckles.

Calipers on both above axles have been sealed. Dust boots look ok.

07-16-2006, 08:12 PM	#1
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	K20 Front Axles 1974 Chevy K20 Dana 44 with 4.10s and flat top knuckles (8 lug). All new ball joints, bearings and calipers. You'll need to turn the new rotors and lube it up as this axle's been sitting for 3 years since it's rebuild. 200.00 1973 Chevy K20 Dana 44 with 3.73's and flat top knuckles (8 lug). All new ball joints, bearings and calipers. You'll need to turn the new rotors and lube it up as this axle's been sitting for 3 years since it's rebuild. 200.00 These should fit earlier trucks as well. Good way to get disk brakes and open knuckles. Calipers on both above axles have been sealed. Dust boots look ok. Last edited by FormerMember; 07-16-2006 at 08:12 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.