crossmember removal - The 1947 - Present Chevrolet & GMC Truck Message Board Network

nwmod39 · 07-19-2006, 06:37 PM

i am getting ready to remove the front crossmember from my 80 c-10 and would like to know if i should take a few measurement first. there is a couple of the holes that look like you can shift the member back/forward so should i?
or could i just remove the member and bolt it back up with no worries.
i am not going to be doing any mods to the member, i just want it out so when i coat the member i get all the way around everything.

thanks
steve

07-19-2006, 06:37 PM	#1
nwmod39 Registered User Join Date: Sep 2005 Location: spokane, washington Posts: 302	crossmember removal i am getting ready to remove the front crossmember from my 80 c-10 and would like to know if i should take a few measurement first. there is a couple of the holes that look like you can shift the member back/forward so should i? or could i just remove the member and bolt it back up with no worries. i am not going to be doing any mods to the member, i just want it out so when i coat the member i get all the way around everything. thanks steve __________________ 1980 c-10: under destruction http://photobucket.com/albums/c372/nwmod39/



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.