One Person Bed Removal - The 1947 - Present Chevrolet & GMC Truck Message Board Network

motocrosschump · 08-30-2006, 05:51 PM

Well I decided to move the tank to the rear. So hooked a 6 ft chain to the crossmembers under the bed (making a V). Then I hooked a Tie Down strap to the chain and routed it through the fender well. on the other end I hooked it to an Cherry Picker. The Picker I pushed the legs on both sides of the tire to keep it from moving.

Then I jack the side of the bed up as high as I could without hitting anything.
Then got on the other side of the bed and lifted by hand and backed the off the truck to the side. Then I jacked it up as HIGH as it will go. and tilted the bed on its side.

08-30-2006, 05:51 PM	#1
motocrosschump Registered User Join Date: May 2005 Location: Texarkana, AR 71854 Posts: 397	One Person Bed Removal Well I decided to move the tank to the rear. So hooked a 6 ft chain to the crossmembers under the bed (making a V). Then I hooked a Tie Down strap to the chain and routed it through the fender well. on the other end I hooked it to an Cherry Picker. The Picker I pushed the legs on both sides of the tire to keep it from moving. Then I jack the side of the bed up as high as I could without hitting anything. Then got on the other side of the bed and lifted by hand and backed the off the truck to the side. Then I jacked it up as HIGH as it will go. and tilted the bed on its side. __________________ 2006 Titan SE Crew Cab Daily Driver 2005 Mazda Tribute (Wifes car) 1969 C10 SWB 350/3 Fleet "Max" 1969 Chevelle 2 door 350/3



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.