Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
09-20-2006, 01:25 PM | #1 |
Licensed to Thrill!
Join Date: Apr 2006
Location: Northwest, GA
Posts: 1,673
|
Underdash A/C install pics (almost finished!)
Finally! I have been working overtime on this little project lately. It has been a long time coming. I've had the unit for a while, just haven't had time to work on it.
Couple of notes first - This is NOT by any means finished yet. This is my mock up after getting my hoses crimped, and I will test everything like this. I plan on using the heat shrink hose ends everywhere for a lot less clutter. This isn't clean - it isn't tidy, and there are some things out of order - just deal with it. I normally wouldn't post pics in this state, but I have promised them to a lot of folks, so I am holding to my word. Here's a link to the pics (If you want an album view or whatever): http://slickorange.com/ac2/acip_index.html 1-3 are of the unit itself. 4 is of the plain firewall (before painting it - notice the cleaned up version in the later pics...yes, all taken tonite. ) 5 is the vacuum stuff (defrost and heater valve). 6 is the dryer and condensor just to see the brackets and hardlines, etc. Pretty much the stock dryer mounting location. I am sort of crazy I guess - those hardlines and that dryer WERE polished aluminum - now they are 500° black. 7 is the control panel. It is totally electronic. Can't use the factory controls with this system because of that. I swapped my controls and radio so I didn't have to cut the dash. |
Bookmarks |
|
|