Heater Cable Removal Tip

[LockDoc]

I did some searching but didn't come up with a post on this. Sorry if it has already been covered….

Here's how I removed the keepers that hold the heater cables onto the control arms without breaking them.
The first picture is the tool I used to remove the keepers. It is one of the small pick tools (approx. 4" long) The small hook is easy to get under the keeper and work it up off of the post. Take your time & work your way around the inside of the keeper and push it up off the post. Make sure that the tool is between the keeper and the cable end as shown in the last picture.

LockDoc