![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Sep 2005
Location: Smith Mountain Lake Virginia
Posts: 1,537
|
Mixing in the rear end
My mistake - while at parts counter, asked what rear gear lube to put in differential - he gave me one bottle - I asked if that was enough for a complete fill - he ran and grabbed another off the shelf. AFTER I put all of one and almost all the second in, I noticed he had given me one bottle of Mobile 80W-90 and one of 80W-140 - I never thought to check the two. All of the 140 went in and darned near all the 90.
Do I empty and start over or go with it for a while and then change out? On the positive side, I also found that after a few taps with a hammer to loosen, the plug came out nicely using the end of a short 3/8" extension (I didn't have any square drives). It's starting to look pretty so heres a quick pic too.
__________________
"A cat will almost always blink when hit between the eyes with a ball peen hammer" (you don't always have to state the obvious) Wear your PPE! You can eat with false teeth but you can't see with a false eye. 1959 Studebaker Silverhawk 350/400 1972 C10 L6 3OTT 2005 F350 - Built - whew! |
![]() |
![]() |
Bookmarks |
|
|