67 burb questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bad_turbo · 10-13-2006, 11:48 PM

just saved a 67 burb 4x4 from the crusher and don't really know much about them. Does the front driveshaft always turn, even out of four wheel drive. The truck is all stock, apparently, and has no indicators on the 4 wheel shifter so I'm not sure what position it is in. It has the inline 6, 250 cu., with a 4 speed. It is a half ton.
Was also wondering is I could swap in a mid 70's to mid 80's 3/4 ton axles and suspension without to many modifications to the frame. Does it have to be from another suburban or would a truck work? Thanks in advance.

P.S. I also need some tail light lenses if anyone knows where to acquire some.

10-13-2006, 11:48 PM	#1
bad_turbo turbo enthusiast Join Date: Jan 2004 Location: carmichael, ca. Posts: 1,826	67 burb questions just saved a 67 burb 4x4 from the crusher and don't really know much about them. Does the front driveshaft always turn, even out of four wheel drive. The truck is all stock, apparently, and has no indicators on the 4 wheel shifter so I'm not sure what position it is in. It has the inline 6, 250 cu., with a 4 speed. It is a half ton. Was also wondering is I could swap in a mid 70's to mid 80's 3/4 ton axles and suspension without to many modifications to the frame. Does it have to be from another suburban or would a truck work? Thanks in advance. P.S. I also need some tail light lenses if anyone knows where to acquire some. __________________ "But daddy, I didn't hit them all with a stick"...what my 6 year old tells me when I pick him up from school early for fighting " Last edited by bad_turbo; 10-14-2006 at 12:24 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.