Oil Pan Removal - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SkylineNXS · 10-14-2006, 10:47 PM

Today, i wanted to take off the oil pan (engine in the truck) in order to check for anything bad looking as you could say. I recently bought it, '66 C10, and its got an I6. I took aff all the necessary screws and such but cannot remove the oil pan due to the fact that the flywheel hangs too low and the cross member below the engine inhibits any more downward angle. I also took off the garud for the flywheel and clutch but the flywheel is still in the way. Is there any way to get the pan off without removale of the engine from the truck?

10-14-2006, 10:47 PM	#1
SkylineNXS Registered User Join Date: Oct 2006 Location: Elgin, IL Posts: 658	Oil Pan Removal Today, i wanted to take off the oil pan (engine in the truck) in order to check for anything bad looking as you could say. I recently bought it, '66 C10, and its got an I6. I took aff all the necessary screws and such but cannot remove the oil pan due to the fact that the flywheel hangs too low and the cross member below the engine inhibits any more downward angle. I also took off the garud for the flywheel and clutch but the flywheel is still in the way. Is there any way to get the pan off without removale of the engine from the truck?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.