|
10-30-2006, 02:46 PM
|
#1 |
|
Blue 67
 Join Date: Apr 2004
Location: Western WA
Posts: 1,178
|
Keeps bleeding!!
Well, I was so happy last night. Finally my 4 wheel disc swap finished, I bent some brake lines (which don't look that bad by the way), bench bled the MC and put things together. Then before I start to bleed the lines, brake fluid start coming out of front driver side caliper. I tighten it to the level that I was worried that I am gona brake it but it still oozed fluid. Now this is the stupid question: are bleeder screws kind of universal for chevys? The reason is I bought the front disc kit from brothers truck while back, then when I started he swap, I found out that some parts are not matching for the left and right. They were nice and tried to help me but then you get kind of frustrated and rather want to go to local shop to get the part to get the project going. For example the front ball joint were different for left and right, the bonjo bolts are different sizes for left and right and now, the bleeder screws require size 10 wrench!. What year american truck switch to metric?! This kit is from 73 + year models.
Anyways, sorry about the long story, would you please give me some advise on bleeder screws since I am still bleeding!!.
__________________
1953 GMC 3/4 ton: current project 1967 C20: 5.3 voretc with T5 conversion, 4 wheel 8 lug disc brake 1972 Nova: my 4 door sport sedan! 5.3 voretc + T5 conversion. drivable project, FUN!! 1979 Camaro Z28: 5.3 vortec conversion with build TH350: drivable project, Fun to drive 1992 Camaro RS convertible (Z28 clone): 5.3 conversion with build T5: on going project 2005 Silverado 2500, 4x4 Duramax, original owner |
|
|
| Bookmarks |
|
|
Threaded Mode