T-5 vs Muncie 4 speed. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

firstgencamaros · 10-27-2002, 12:41 AM

Hello all,
Does anyone know what the length of a T-5 is compared to a muncie M-XX? I have a six cylinder and a 3 speed in my 68 shortbed now and think the T-5 would work out nice if the length is close to the same. Has anyone done this swap? The T-5 should bolt right up to the stock bellhousing, just switch out to a fine spline clutch disk. I am concearned about where the shifter will come through the floor. Any help on this would be great.
Thanks,

10-27-2002, 12:41 AM	#1
firstgencamaros Registered User Join Date: Sep 2002 Location: Gilbert, AZ Posts: 151	T-5 vs Muncie 4 speed. Hello all, Does anyone know what the length of a T-5 is compared to a muncie M-XX? I have a six cylinder and a 3 speed in my 68 shortbed now and think the T-5 would work out nice if the length is close to the same. Has anyone done this swap? The T-5 should bolt right up to the stock bellhousing, just switch out to a fine spline clutch disk. I am concearned about where the shifter will come through the floor. Any help on this would be great. Thanks, __________________ FGC



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.