drum brakes - The 1947 - Present Chevrolet & GMC Truck Message Board Network

boundstaffpress · 11-06-2006, 01:25 PM

This weekend I put new brake cylinders on the back of my truck. Bled and adjusted them. The front has been bled before. I has a lot more pedal now than before. I still lock up my passenger front wheel before the others. I have to plan a lot in advance to get my rig slowed down enough to not skid that tire.

To get the front drum off of my 67 k10 do I need to remove the hub and repack the bearings? I bought a cylinder rebuild kit for the fronts, but was held up when the drum didn't want to come off the hub.

Any ideas?

11-06-2006, 01:25 PM	#1
boundstaffpress Jamie Hyneman is my twin Join Date: Nov 2005 Location: La Junta, Colorado Posts: 705	drum brakes This weekend I put new brake cylinders on the back of my truck. Bled and adjusted them. The front has been bled before. I has a lot more pedal now than before. I still lock up my passenger front wheel before the others. I have to plan a lot in advance to get my rig slowed down enough to not skid that tire. To get the front drum off of my 67 k10 do I need to remove the hub and repack the bearings? I bought a cylinder rebuild kit for the fronts, but was held up when the drum didn't want to come off the hub. Any ideas? __________________ Justin SOLD 1967 K10 Fleetside, 283, Front and Rear Posi SOLD Color Wiring Diagrams Now in High Resolution V8 and Cab and Cab and Chassis



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.