Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
11-16-2006, 07:15 PM | #1 |
Senior Member
Join Date: Jan 2000
Location: Cincinnati, Ohio
Posts: 1,492
|
Need help with tilt column
Ok i'm doing a body swap on a 87 K30. To make things harder the body I'm using is from a manual trans truck while the K30 is a turbo 400. Neither one originally had the tilt column.
Now my electrical questions: 1st Where does the black wire coming from the turn signal/wiper/delay wiper lever hook up to? Neither truck had the delay wiper option before. 2nd I'm assuming I will have to change out the fuse boxe and wires since one truck was a 4 speed and now will be an auto. I'm looking for the wires the go to the neutral/reverse switch at the base of the column. I think I found the neutral wires on the 4 speed body but not the orange/black wire for the other one. Not even mentioning the fun part cutting holes in the roof for the 1 ton cargo lights......lol I'm wanting to get this thing together so I can actually start this new 572.... |
Bookmarks |
|
|