Project: Slow Build - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rokcrln · 11-26-2006, 07:03 PM

Well I had some time today with the rain to get out into the shop but I was told Holiday weekends are family time so get to work on our truck

Gotta luv her!

Anyways I finished up the rockers and cab corners, welded up all the old holes in the floor as well as finishing up welding the body drop cuts. Then I built my trany tunnel for clearance of my drivshaft at full drop as well as my crossmember clearance issue. Here are a few pics. Now I can try out some different seam sealers and paint/undercoat the bottom of the cab and move on to the fire wall on the next holiday weekend

Kevin
LFD Inc.

11-26-2006, 07:03 PM	#11
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: Project: Slow Build Well I had some time today with the rain to get out into the shop but I was told Holiday weekends are family time so get to work on our truck Gotta luv her! Anyways I finished up the rockers and cab corners, welded up all the old holes in the floor as well as finishing up welding the body drop cuts. Then I built my trany tunnel for clearance of my drivshaft at full drop as well as my crossmember clearance issue. Here are a few pics. Now I can try out some different seam sealers and paint/undercoat the bottom of the cab and move on to the fire wall on the next holiday weekend Kevin LFD Inc. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.