tail lights not working - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gouldie · 12-03-2006, 03:35 PM

hi

i have a 67 c10 longbed and the tail lights are not working. i tested the voltage at the lights and got nothing. so i up to a plug towards the back of the truck mounted on a cross member and got less than 1 volt. i tried folling the wires but got lost when i reached the cab not finding any more places to test the voltage.

i figure the harness from the rear crossmember to the lights is bad so i will replace that but shouldn't the voltage be closer to 12 not 1. any ideas would be appreciated.

thanks,
chris

12-03-2006, 03:35 PM	#1
gouldie Registered User Join Date: Oct 2006 Location: daytona beach Posts: 101	tail lights not working hi i have a 67 c10 longbed and the tail lights are not working. i tested the voltage at the lights and got nothing. so i up to a plug towards the back of the truck mounted on a cross member and got less than 1 volt. i tried folling the wires but got lost when i reached the cab not finding any more places to test the voltage. i figure the harness from the rear crossmember to the lights is bad so i will replace that but shouldn't the voltage be closer to 12 not 1. any ideas would be appreciated. thanks, chris __________________ 67 c10 250 I6 3 on the tree no options air ride, paint and big block coming within the next 23 years 2001 mustang gt for going fast



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.