Parting hot rod 72 Cheyenne

[ratrod67]

Well, I can't seem to sell my 72 so I'm parting it out. I'm not taking anything off until the motor sells. After that everything is fair game. I want $4000 for the motor. It has about 2000 miles if that since it was rebuilt. I have all reciepts. You can hear and drive if you want to. after the motor sells I'll price the rest of the truck parts. This is just for the motor at this time. I'll ship it but buyer will have to pay for it.



1972 Chevy Cheyenne

Motor:454 .60 468 ci
cast crank turned .10 .10
Shot-peened rods with ARP bolts
Speed-Pro coated pistons
Comp Cams 282 solid cam with Comp Cams lifters and pushrods
Lunati roller thrust bushing
Cloyes double roller timing chain
Mini starter
TCI flexplate with ARP bolts
Oval port heads with hardened seats, 3 angle valve job
Manley valves 2.19 and 1.88
Crane Gold roller rockers 7/16 stud
Edelbrock Airgap intake
Moroso Billet valve covers
Full MSD ignition with 6AL box
Taylor wires
Demon carb

Transmission:
TH350
Full manual conversion
B M Holeshot 3000 converter
B M Megashifter
B M 24,000 GVW cooler
TCI line lock
1 piece driveshaft with new yoke and Spicer Ujoints

Exhaust
Headman coated headers 1 7/8 tube
1 chamber Flowmaster mufflers
3 inch pipe with"H" pipe and dumps in front of axle

Rearend
12 bolt
Richmond posi 4 series carrier
4:10 gears
M/W axles

Fuel system
Holley fuel pump
Holley regulator
RCI fuel cell under bed
Fram filter
Goodyear Hose
Braided from regulator to carb
Cut-off switch for pump mounted into back-up light

Suspension and brakes:
4 wheel disc with CPP rear disc kit
1972 Corvette master cylinder, new booster
Master power prop valve
Stainless hose upgrade
New Emergency brake cables
Fresh brakes up front 5 lug factory disc
DJM 3 inch drop front springs
Chisholm spindles
Chisholm upper tubular control arms
1 ton front sway bar
Rear DJM 6 inch drop springs
Brother adjustable tracking arm
Rebuilt front suspension

Wheels and tires
15X10 rear Centerline Telstars with ET Streets
15X7 front with 245/60 tires

Misc
New 4 core radiator
New carpet and kick panel carpet
recovered seat
New gauge panel
AutoMeter gauges with Playback tach and shiftlight
Kenwood CD with electric antenna mounted in stake pocket
New cab mounts
Spray in bedliner
New wiring
Battery relocated to bed
Sir Michaels steel roll pan in rear