FS: Spindles - stock height- for disk brakes - KANSAS - The 1947 - Present Chevrolet & GMC Truck Message Board Network

53lowdown · 02-04-2007, 05:35 PM

SOLD

Early Classic spindles off of 69 C10 - stock height disk-brake conversion spindles. New 1 year ago, installed on truck but only driven a few hundred miles. I switched to dropped spindles so no longer need these.

These work with the 69 C10 ball joints and tie-rod ends, and 70? and up 1 1/4" rotors and calipers. Only the spindles are for sale.

Early Classic Spindles are the original '60-'72 Stock Height (Disc Brake Conversion) Spindles, and are machined to accept your original tie rods and ball joints.

LIKE NEW, but USED
$150 plus shipping from 66610 (Kansas)

02-04-2007, 05:35 PM	#1
53lowdown Junior Member Join Date: Feb 2005 Location: topeka, kansas Posts: 258	FS: Spindles - stock height- for disk brakes - KANSAS SOLD Early Classic spindles off of 69 C10 - stock height disk-brake conversion spindles. New 1 year ago, installed on truck but only driven a few hundred miles. I switched to dropped spindles so no longer need these. These work with the 69 C10 ball joints and tie-rod ends, and 70? and up 1 1/4" rotors and calipers. Only the spindles are for sale. Early Classic Spindles are the original '60-'72 Stock Height (Disc Brake Conversion) Spindles, and are machined to accept your original tie rods and ball joints. LIKE NEW, but USED $150 plus shipping from 66610 (Kansas) __________________ _______________________________________ 62 SWB BBW (under construction) 86 Vette Convertible Last edited by 53lowdown; 10-05-2007 at 09:30 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.