this rear ends got me boiling :-(

[Robznob11]

well i bought moser axles for my 67 and while i was at it had them convert the bolt pattern to 5 on 4 3/4 so im going to change them out and the bearings and seals while im at it so i open it up. i go to take out the pin retaining bolt and guess what it twist off with ease so now i have the small pin portion stuck in the large pin that goes between the axles, so i drill a hole in it and attempt to remove it with an easy out, guess what the easy out broke off in it, so now i try to drill it again and am burning up bits left and right, guess im screwed and will have to find another rear end to rebuild .....